KnightCote? Wire Coating
| 牌號 | KnightCote? Wire Coating |
| 廠家 | Carpenter Technology Corporation |
| 分類 | Steel |
| 介紹 | KnightCote? wire coating is a relatively thin, uniformly applied coating that can be applied to heading-grade wire. KnightCote coating prevents metal-to-metal contact, provides protection against die wear, and prevents seizure, scoring, galling and welding of parts. It is applied by a proprietary process that results in minimal variation of thickness within or between coils. This coating can withstand high-impact forces, severe upsetting and extrusion and warm heading. It can be applied to all heading alloys and on either bare or copper-coated wire. It can be used in higher temperature applications than typical molybdenum disulfide-type coatings. It is a solid film that does not deteriorate, is not hygroscopic, exhibits long shelf life and is thermally stable. Carpenter undertook the development of KnightCote coating in response to several needs in the heading industry. The most important of these was the ecological problem associated with the removal of copper coatings and the disposal of the resultant spent acid. It was apparent that a coating was needed that would replace copper, while offering similar or superior lubricating properties. The six criteria established by Carpenter for a suitable heading lubricant were: 1. Easy to apply and control. 2. Exhibits excellent extrudability and cold headability. 3. Relatively easy to remove following fabrication. 4. Stable and exhibits good shelf life. 5. Components are nonpolluting and nontoxic. 6. Thermally stable and suitable for warm/hot heading. Removal: KnightCote coating can be removed by placing the fabricated parts into dilute hot alkaline cleaning solutions (0.2 lb./gal.) at temperatures from 160 to 190°F. Immersion times of four to eight minutes without agitation are sufficient to loosen the coating from the metal surface. Only a portion of the coating is actually removed by stationary treatments, but the balance of the coating can be readily removed by rinsing the parts with water. There are advantages in time savings and removal efficiency if some form of motion during the cleaning operation is employed, such as agitators, vibratory baskets, tumblers, and ultrasonic or circulating solutions. For certain applications, some customers prefer to have the dual coatings of copper and KnightCote as an overcoat on their raw materials. The practice used in removing the copper remnants from fabricated parts (dilute nitric acid digestion) should be effective in simultaneously removing copper and KnightCote coating. The coatings could also be separately removed by initially immersing the parts into an alkaline cleaning solution followed by exposure to nitric acid. Toxicology & Disposal: The ingredients of KnightCote coating are nontoxic and nonpolluting, and there are no known regulations governing the disposal of the components. The limiting disposal factor may be the cleaning solutions containing the components. Availability: From the mill, the heading wire can be supplied as KnightCote coated and cold drawn to finish size in either soaps or oils or dry. Coils can also be supplied as KnightCote coated without final cold drawing. Applications: KnightCote coating has been used to produce a variety of fasteners requiring different degrees of upsetting and extrusion. It has been successfully used on numerous stainless grades and high temperature alloys. Most heading shops use lubrication on the wire entering the heading machine as well as lubrication within the machine. KightCote coated wire has been found to be compatible with soaps and oils used in these operations. Highly alkaline conditions in this respect should be avoided since they may adversely affect total lubricity. |
在線客服: 
申請技術報告方式
可通過以下我公司客服QQ，索要技術報告
| 客服1： |
客服2： |
| Carpenter Technology Corporation 產品展示 | 種類 |
|---|---|
| Carpenter No. 158? Plastic Mold Steel | Steel |
| Ecolube? II Wire Coating | Steel |
| Carpenter C-XB Valve Steel | Steel |
| Carpenter Silicon Core Iron "B" | Steel |
| Micro-Melt? M48 Alloy | Steel |
| CRB-7? Alloy | Steel |
| Extendo-Die? Hot Work Die Steel | Steel |
| NiMark? Alloy 300 | Steel |
| Carpenter 7-Mo PLUS Stainless | Steel |
| Trinamet? Stainless | Steel |
訂購說明
上海松翰塑化科技有限公司訂貨流程
【訂購導引】
我司所銷售所有產品均為原廠原包，均可提供相關資料報告（如：物性表，MSDS報告，UL報告，COA報告，SGS報告，F(xiàn)DA等）！
如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告，請您通過電話或是客服QQ與我聯系！
【物流說明】
自接到貴司訂購單24小時內發貨，珠三角，長三角，北京，天津均支持代收貨款。貨物送達后，請第一時間檢查外包裝，如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存，并在24小時內與我司客服部取得聯系。
【訂購流程】
【退換貨處理】
退貨：
依照中華人民共和國消費者保護法規，在您收到貨品7天內，若發現您收到的商品有瑕疵或損壞，您可以要求退貨，請主動與本公
司聯絡，敝公司接到您的商品之后，會將您的購物金額全額退回。
換貨：
若您收到的商品有瑕疵或損壞，請您于7天內與本公司聯絡，本公司有專人處理換貨事宜。
我司所銷售所有產品均為原廠原包，均可提供相關資料報告（如：物性表，MSDS報告，UL報告，COA報告，SGS報告，F(xiàn)DA等）！
如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告，請您通過電話或是客服QQ與我聯系！
【物流說明】
自接到貴司訂購單24小時內發貨，珠三角，長三角，北京，天津均支持代收貨款。貨物送達后，請第一時間檢查外包裝，如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存，并在24小時內與我司客服部取得聯系。
【訂購流程】
【退換貨處理】
退貨：
依照中華人民共和國消費者保護法規，在您收到貨品7天內，若發現您收到的商品有瑕疵或損壞，您可以要求退貨，請主動與本公
司聯絡，敝公司接到您的商品之后，會將您的購物金額全額退回。
換貨：
若您收到的商品有瑕疵或損壞，請您于7天內與本公司聯絡，本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved