Ecolube? II Wire Coating

牌號Ecolube? II Wire Coating
廠家Carpenter Technology Corporation
分類Steel
介紹Ecolube II is a nonmetallic lubricant which is applied as a thin coating onto heading-grade wire. The coating is a tenaciously adhering solid film which does not deteriorate, is not hygroscopic, exhibits long shelf life and is thermally stable. Ecolube II prevents metal-to-metal contact and provides protection against die wear, prevents seizure, scoring, galling and welding of metal parts. This is accomplished through the special formulation of Ecolube II, whose basic component is molybdenum disulfide. This compound exhibits a decreasing coefficient of friction as contact pressures increase. These properties permit the coating to withstand high-impact forces, severe upsettings, difficult shank extrusions and warm heading.

The development of Ecolube II, a nonmetallic lubricant for heading, was undertaken by Carpenter in response to several needs of the cold heading industry. The most important of these was the ecological problem associated with the removal of copper coatings and the disposal of the resultant spent acid. It was apparent that a nonmetallic coating was needed which would replace copper, while offering similar or superior lubricating properties.

The seven criteria established by Carpenter for a suitable cold heading lubricant were:
1. Easy to apply and control.
2. Exhibits excellent extrudability and cold headability.
3. Relatively easy to remove following fabrication.
4. Stable and exhibits good shelf life.
5. Components are nonpolluting and nontoxic.
6. Thermally stable and suitable for warm heading.
7. Competitive in price to copper coating.

Extensive field testing of coated coils by cold heading shops representing a cross-section of the industry proved that Ecolube II provided similar or superior lubricating properties to copper. Concurrently, an independent study was performed at a leading university on extrusion and frictional properties on stainless steel. The purpose was to compare the heading and extrusion qualities of Ecolube II to three other coating systems: regular copper plus soap, heavy copper plus molybdenum disulfide and soap, and grease drawn lubricants. The total results of these studies showed that Ecolube II outperformed the other coatings in terms of the observed frictional coefficients and ease of extrusion at all reductions.

Removal:
Although Ecolube II tightly adheres to the surface of work pieces, even through multistage operations, the coating can be removed by placing the fabricated parts into dilute hot alkaline cleaning solutions (0.2 lb./gal.) at temperatures from 160 to 190°F. Immersion times of four to eight minutes without agitation are sufficient to loosen the coating from the metal surface. Only a portion of the coating is actually removed by stationary treatments, but the balance of the coating can be readily removed by rinsing the parts with water. There are advantages in time savings and removal efficiency if some form of motion during the cleaning operation would be employed, such as agitators, vibratory baskets, tumblers, ultrasonics or circulating solutions.

For certain applications, some customers prefer to have the dual coatings of copper and an Ecolube II overcoat on their raw materials. The practice used in removing copper remnants from fabricated parts (dilute nitric acid digestion) should be effective in simultaneously removing copper and Ecolube II. The coatings could also be separately removed by initially immersing the parts into an alkaline cleaning solution followed by exposure to nitric acid.

Toxicology and Disposal:

The ingredients of Ecolube II are nontoxic and nonpolluting, and there are no known regulations governing the disposal of the components. The limiting disposal factor may be the cleaning solutions containing the components.

Availability:

From the mill, the heading wire can be supplied as Ecolube II coated and cold drawn to finish size in either soaps or oils, depending on customer needs. Coils can also be supplied as Ecolube II coated without final cold drawing.

Applications:
Most heading shops use lubrication on the wire entering the heading machine as well as lubrication within the machine. Ecolube II coated wire has been found to be compatible with soaps and oils used in these operations. Highly alkaline conditions in this respect should be avoided since they may adversely affect total lubricity.
在線客服:  點擊這里給我發消息 點擊這里給我發消息 上海松翰塑膠
申請技術報告方式

可通過以下我公司客服QQ,索要技術報告

客服1:點擊這里給我發消息 客服2:點擊這里給我發消息
Carpenter Technology Corporation 產品展示 種類
Carpenter 286-LNi Alloy Steel
Micro-Melt? M4 Alloy Steel
Carpenter Stainless Custom 630 Steel
Carpenter Stainless Type 440A Steel
CRB-7? Alloy Steel
Chrome Core? 13-XP Alloy Steel
Micro-Melt? T15 Plus Alloy Steel
Project 70+? Type 303 Stainless Steel
Carpenter 15-15HS? Max Stainless Steel
Carpenter SIL No.1 Valve Steel Steel

訂購說明

上海松翰塑化科技有限公司訂貨流程

【訂購導引】
       我司所銷售所有產品均為原廠原包,均可提供相關資料報告(如:物性表,MSDS報告,UL報告,COA報告,SGS報告,F(xiàn)DA等)!
       如您需要提前了解原料產品的相關性能或是需要原料產品的相關報告,請您通過電話或是客服QQ與我聯系!

【物流說明】
       自接到貴司訂購單24小時內發貨,珠三角,長三角,北京,天津均支持代收貨款。貨物送達后,請第一時間檢查外包裝,如發現物流過程中出現大量包裝損壞及原料外漏的,請讓物流人員出具證明并保存,并在24小時內與我司客服部取得聯系。


【訂購流程】
訂貨流程



【退換貨處理】
退貨:
依照中華人民共和國消費者保護法規,在您收到貨品7天內,若發現您收到的商品有瑕疵或損壞,您可以要求退貨,請主動與本公
司聯絡,敝公司接到您的商品之后,會將您的購物金額全額退回。

換貨:
若您收到的商品有瑕疵或損壞,請您于7天內與本公司聯絡,本公司有專人處理換貨事宜。
版權所有 ? Shshsj.com All Rights Reserved