斷裂伸長率 | 150% | 拉伸強度 | 100MPa | 密度 | 1.3g/cm3 |
吸水率 | 0.04% | 用途級別 | 電子電器部件,薄膜級 | 規格級別 | 耐熱,阻燃,高強度薄膜,電子電器部件 |
成型收縮率 | 2% | 特性級別 | 高強度,阻燃級,高流動,耐高溫,抗靜電 |
|
產品簡述
斷裂伸長率 | 150% | 拉伸強度 | 100MPa | 密度 | 1.3g/cm3 |
吸水率 | 0.04% | 用途級別 | 電子電器部件,薄膜級 | 規格級別 | 耐熱,阻燃,高強度薄膜,電子電器部件 |
成型收縮率 | 2% | 特性級別 | 高強度,阻燃級,高流動,耐高溫,抗靜電 |
詳細數據
訂購指南
性能項目 | 測試方法 | 測試條件(狀態) | 測試數據 | 數據單位 | |
物理性能 | 密度 | ISO 1183 | 1.30 | g/cm3 | |
收縮率 | Internal Method | 200℃,0.0500mm | <2.0 | % | |
吸水率 | ISO 62 | 平衡,23℃,0.0500mm,50%RH | 0.040 | % | |
機械性能 |
拉伸模量 | ISO 527-2 | 23℃,0.125mm | 2400 | MPa |
23℃,0.250mm | 2200 | ||||
23℃,0.0250mm | 3000 | ||||
23℃,0.0500mm | 2800 | ||||
拉伸應力 | ISO 527-2 | 斷裂,23℃,0.125mm | 110 | MPa | |
斷裂,23℃,0.250mm | 100 | ||||
斷裂,23℃,0.0250mm | 130 | ||||
斷裂,23℃,0.0500mm | 120 | ||||
拉伸應變 | ISO 527-2 | 斷裂,23℃,0.125mm | >150 | % | |
斷裂,23℃,0.250mm | |||||
斷裂,23℃,0.0250mm | |||||
斷裂,23℃,0.0500mm | |||||
褲型撕裂耐性 | ISO 6383-1 | 50µm | 6.70 | N/mm | |
Puncture Resistance | Internal Method | 23℃,50µm | 26.0 | KJ/m2 | |
熱性能 | 線形膨脹系數 | ASTM D-696 | 流動,0.0500mm | 0.000047 | cm/cm/℃ |
電氣性能 | 體積電阻率 | ASTM D-257 | 23℃,0.0500mm | 4.0E+16 | ohm.cm |
介電強度 | ASTM D-149 | 23℃,0.250mm | 270 | kV/mm | |
23℃,0.0500mm | 190 | ||||
23℃,0.125mm | 120 | ||||
23℃,0.0250mm | 70 | ||||
介電常數 | ASTM D-150 | 23℃,0.0500mm,10MHz | 3.50 | ||
耗散因數 | ASTM D-150 | 23℃,0.0500mm,10MHz | 0.0020 | ||
Dielectric Breakdown | ASTM D-149 | 23℃,25.0µm | 6750 | V | |
23℃,50.µm | 9500 | ||||
23℃,125.0µm | 15000 | ||||
23℃,250.0µm | 17500 |